Hard water is the common name in our life. It refers to the water with more calcium and magnesium ions and other impurities.In life, the use of this kind of water more, it is easy to accumulate scale;The same is true in boiler equipment.

Boiler water is generally containing impurities, mainly for calcium salt and magnesium salt and other substances.If the hardness is above 8 degrees, then, it is called hard water, and the use of it, easy to form hard scale in the boiler, which will increase the consumption of boiler energy.In order to solve and avoid the boiler scale problem, it is necessary to start from the source and soften the hard water.

1 million kcal boiler, which is equal to 1.7 tons of boiler, because 600,000 kcal is equal to 1 ton, so there can be drawn this conclusion.

When it is found that the heating pipe of the boiler is frozen, the solution measures are mainly as follows.

Measure 1: boiler running at low temperature, through the gradual increase of its temperature, to naturally thaw.

Measure two: the use of fire welding, or the use of liquefied gas for fire baking.

Measure three: Use electric heating or hot water pouring to defrost.

The energy used by the gas-fired boiler is gaseous fuel, which belongs to a kind of clean energy. Therefore, the flue gas produced by the boiler does not need special treatment.The water supply is also softened water, and only needs to be cooled and precipitated when it is discharged. The operation is very simple.